iRemove Hello Screen Bypass – iPad A12/A13

Description

OFFICIAL WORLDWIDE DISTRIBUTOR iRemove Hello Screen Bypass – iPad A12/A13 Bypass a stuck Hello activation screen on supported A12/A13 iPad models using the USBLiter8 hardware exploit. Bypass a device stuck on the Hello activation screen on a supported A12 or A13 chip iPad using iRemove Tools together with the USBLiter8 method. This exploit targets a SecureROM-level vulnerability specific to A12/A13 chips and requires a dedicated RP2350 hardware module in addition to the iRemove software — it cannot be completed with software alone. DEVICEiPad mini (5th gen), iPad Air (3rd gen), iPad (8th/9th gen) CHIPA12 / A13 Only SIGNALWi-Fi Only (No Signal) What This Service Does Bypasses a device stuck on the Hello activation screen on supported A12/A13 iPad models Works through the USBLiter8 exploit, using a Pwned DFU state reached with the RP2350 module Supported on iOS/iPadOS 18.x through 26.x Device works over Wi-Fi after the bypass; cellular features (on cellular models) are not supported Requirements Correct IMEI or Serial Number of the device submitted at checkout Device must use an A12 or A13 chip and be currently supported by iRemove Tools Device must be on the Hello activation screen, unactivated A dedicated RP2350 module (e.g. Waveshare RP2350 USB-A), a USB-C to USB-C cable and a USB-A to Lightning cable A computer running the latest iRemove software (Windows or macOS) and a stable internet connection How It Works 1Download and connect iRemove Tools, then place the device in DFU Mode and connect the RP2350 module as guided by the software 2Find your iPad's IMEI or Serial Number on the device itself or its original packaging 3Submit your order with the IMEI or Serial Number entered exactly 4Follow the RP2350 status light and software prompts until the Hello screen bypass completes Official iRemove Tools software — required to connect your device ⬇️Get iRemove Hello Bypass Tools & RP2350 Guide View the detailed step-by-step guide and requirements on iRemove's official page Important Before Ordering This method requires a separate RP2350 hardware module; it cannot be completed with the iRemove software alone. Connect your iPad and confirm compatibility before placing your order. After this bypass the device works over Wi-Fi only. Verify the IMEI or Serial Number carefully before submitting. Compatibility Notice Supported iPad models and iOS versions are set by iRemove Tools and can change with software updates. Confirm your device is supported by connecting it to iRemove Software before ordering. Frequently Asked Questions Will I have cellular signal after the bypass? No. This method restores Wi-Fi functionality only. Do I need extra hardware? Yes, a dedicated RP2350 module and the correct cables are required alongside the iRemove software. See the official guide linked above for the full equipment list and setup steps. What do I need to submit? The device's IMEI or Serial Number, entered exactly. www.iphoneunlockingstore.com